Fun To Do: Castable Blend

US$109.00

The Castable Blend has been designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D.

Available in Red only.

Out of stock

Email when stock available

Category:

Description

All resins are designed to be ultra fast! 
Curing times of 0.5 seconds for 0.02mm layers are easily achieved on standard DlP printers with an average light source of around 240Watts.

A broad range of reactivity!
The resins have a very broad range of reactivity, it extends from the very short wavelengths of 225nm to the near/visible wavelengths of 415nm. By incorporating a very smart blend of photo initiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! Do you have a laser SLA machine? or perhaps a DLP printer with a LED source of illumination? As long as the wavelength is between 225nm and 415nm, it will work, and it will work fast!
Besides the wavelength of the lightsource several other factors are important, so please check out the properties page. If you are in doubt if your specific machine is compatible with our resins, just send us an e-mail.

The Fun To Do resins have an ultra low shrinkage! 
Limited shrinkage of 0.5%.
It is basically what you see is what you get. 3.5% seems to be little but if you take an object of 10cm (100mm) 3.5% is 3.5 mm which is nearly half a centimetre! This is huge compared to the 0.5mm the Fun To Do Resins achieve.

A natural resistance to water and most chemicals!
Resins have a natural resistance against water, in liquid form it is highly hydrophobic. Once fully cured there is hardly any chemical that can dissolve our resins. Especially the Industrial blend has a high resistance to chemicals. Cured prints have been withstanding the elements and various chemicals for several years now! To see which chemicals have been tested click here

User Friendliness makes you want to build more!

Resins have been built to be user friendly as possible. These efforts have resulted in a series of low odor resins with minimal skin irritation.

Affordable resins make it possible for you to build more!
By using these affordable resins you can afford to experiment, extend your knowledge about supports, exposure times, material thickness without having to think about the costs of the materials all the time.

More technical details and properties

Experience

Years of studying and practising poly chemistry in various disciplines really pays off in the design of practical and affordable resins. Fun To Do resins are not only used in the DLP 3D printing world, but are also popular in the SLA industry.

  • Rapid Prototyping
  • Automotive industry
  • Architecture
  • Modelling
  • Toy and Game industry
  • Production
  • Dental industry

Additional information

Weight 1 kg
Dimensions 26 × 10 × 10 cm