Miicraft Ultra Series
The Ultra Series is built for high precision and durability. The printers have X:Y resolution ranging from 30 to 65 microns with build plates from 57x32x120 to 150×84.4x120mm. There is also the configuration to change the wavelength (385/405 nm)
Jeweller's Aid
The MiiCraft is capable of building over 75 rings (size dependent) in one print session. The 3D Printer allows you to manufacture in-house, allowing you to Design, Print & Cast in a day.
Explore Microfluidics
The MiiCraft is optimized for universities and research institutions who have tight deadlines and require high quality parts.
Reliable for Dentists
The MiiCraft provides clinicians with the ability to reliably and accurately print dental (parts) in daily production. With the MiiCraft’s Open Source Technology, the MiiCraft can take advantage of all available dental materials to 3D print partial dentures, surgical guides, crowns, bridges, veneers, working models and more.
Technical Details
Item
Area(mm)
XY Res.
Wavelength
Z-Layer Resolution
Printer Size & Weight
Ultra
50
57x32x120
30 μm
365/385/405 nm
5-200 μm
66x66x85cm | 42.5Kgs
Ultra
80
80x45x120
41.5 μm
365/385/405 nm
5-200 μm
66x66x85cm | 42.5Kgs
Ultra 100
102x57.5x120
53 μm
365/385/405 nm
5-200 μm
66x66x85cm | 42.5Kgs
Ultra 125
125x70x120
65 μm
365/385/405 nm
5-200 μm
66x66x85cm | 42.5Kgs
Ultra 150
150x84.4x120
78 μm
365/385/405 nm
5-200 μm
66x66x85cm | 42.5Kgs
“Great service. We are happy with the printers.” -Jewlr.ca
Tony Davis
CEO
FAQ
Most frequent questions and answers
- We have been the Global distributor of MiiCraft printers since 2014 and have a very good understanding of the printer.
- We are your key contact whether you need information, printing advice or general customer service questions they are handled by us personally.
- As your digital partner, we will be with you every step of the way from when you first receive and unbox your MiiCraft printer to the first set of prints.
- We will also provide you with important tips that will allow you to create models that will take advantage of your MiiCraft printer by eliminating the need for supports and maximizing the resolution of your printer and we can also provide valuable guidance in the area of casting and other materials that we are continually developing and experimenting with.
- The MiiCraft 3D printer has been built to be a 3D printer from the ground up.
- All the parts and components have been specifically built and engineered for 3D printing.
- The light engine is the key feature of all resin based 3D printers, since this is the component that solidifies and builds the 3D printed model.
- The MiiCraft printer uses a LED DLP light engine specifically made for 3D printers, unlike other commercially available printers that use a standard home projector to serve as the light engine.
- The teflon vats, which houses the resin, is amongst the least expensive on the market.
- Each MiiCraft VAT will cost US$125, in other available systems these VATs can cost upwards to US$500.
- The average lifespan of the film inside the VAT ranges from 3 to 6 months depending on how diligent you are with the basic maintenance of resin. You can replace the entire VAT or purchase a replacement film for US$50.
- An experienced user may see a longer lifespan when using the vat.
- The MiiCraft printer does not need to be calibrated when you receive it. All of the calibration is done during manufacturing and is fixed in place before shipping.
- The MiiCraft printer does NOT come with any additional recurring costs related to the slicing software or maintenance.
- The strengths of a dedicated LED DLP light engine is that it is the only way to create an efficient, fine-tuned 3D printer at the exact 405 nm wavelength, which is the optimal wavelength needed to cure the vast majority of the 3D printer resins.
- An off the shelf home projector is turned into a 3D printer when the UV filter, which is located inside the unit, is removed in order to access this 405nm wavelength. By doing so, the home projector is now running at 90% of its full power output.
- This excess in power starts to decade the projector within months.
- In the case of the dedicated MiiCraft LED DLP projector, the power output needed to run the printer is only 20%, and this results in an excellent use of power without any degradation of power or the LED DLP projector.
- In comparison to the home projector, when the MiiCraft projector was tested at a 90% output and the results showed no degradation of power or effectiveness in over one year of daily use under normal conditions.
- The MiiCraft LED DLP printer has one of the lowest year to year cost of operation.
- With the delivery of your MiiCraft printer, you will have everything needed to start a print once you have everything in place.
- As you use your printer more and more, you will need supplies from month to month.
- For MiiCraft printers that are purchased through Creative CADworks, you will have access to the lowest cost of supplies for the MiiCraft available.
- Your castable resin cost will be US$195 per kg, which equates to anywhere between $0.30 to $0.75 for an average sized ring.
- The cost of a teflon vat is US$125, the average lifespan of the film inside the VAT ranges from 3 to 6 months depending on how diligent you are with the basic maintenance of resin. You can replace the entire VAT or purchase a replacement film for US$50.
- There is NO recurring software costs or a maintenance program. The printer is built to have the simplicity of plug and play technology.
- Simply put, No. Each and every MiiCraft is shipped from the factory fully calibrated for immediate use.
- We do an additional calibration before we send out each and every unit.
- Once the printer is receive by our customer, we immediately do a parts test to ensure nothing was damage during shipping.