MadeSolid Flexsolid Filament – Clear (3.00mm)


MadeSolid Flexsolid Filament – Clear (3.00mm)


Elastic, stretchy, flexy and tough – meet FlexSolid! FlexSolid is extremely flexible without tearing easily unlike other flexible filaments. It is ideal on anything that requires engineering tolerance without compromising on long term durability. Compatible with non-Bowden printers. Note: We do not recommend FlexSolid for intricately detailed prints as stringiness may occur.

2 in stock

3D Printed wearables and fashion are now possible with this fantastic elastic. Compatible with all major consumer FDM/FFF printers. 

  • Opaque white finish
  • In 1.75mm and 3.00mm diameters
  • Can print significant 60° overhangs without failing
  • Flexible and resistant to tear
  • No warping
  • Heated plate not necessary
  • Fast print speed


Makerbot Replicator 2X
1. Print temperature: 230C
2. Feed rate: 40mm/s

Type A Machines Series 1 2014
1. Print temperature: 240C
2. Print speed: 50mm/s

Up! Plus 2
1. Extrusion temperature: “ABS” setting
2. Quality: “Fine” setting

Flashforge Dreamer–Slic3r
Layer Height: .2
Number of shells: 3
Print Temp: 240
Bed Temp: 80
Print Speed: 50mm/s
Travel Speed: 80mm/s
Fill Amount: 18% Note: Use rigid feed tube

AirWolf–Using the Robo3D Matter control, using matter slice, 3 perimeters, .2mm layer, print fan on, 220-230 extrude, 55 bed. Robo’s wade extruder use 50% PLA speeds. Print Speeds approximately 15mm/s ** Note: **The robo extruder has a large gap between the hotbed bolt and the hot end throat. The filament bind up on retractions and fast printing

Additional information

Weight .5 kg
Dimensions 21 x 22 x 6 cm



There are no reviews yet.

Be the first to review “MadeSolid Flexsolid Filament – Clear (3.00mm)”

Your email address will not be published. Required fields are marked *